A digital long pulse integrator for EAST Tokamak

• This digital integrator is done in real time integration and data transmission.
• Chopper technology and linear compensation is used for drift correction.
• This integrator has achieved results of 411 s long pulse plasma discharge in 2012 EAST campaign.

A digital integrator has been developed to be compatible with the long pulse plasma discharges on the Experimental Advanced Superconductor Tokamak (EAST), in which the induced signal is modulated by a chopper, and a field programmable gate array (FPGA) in the 16-bit digitizer is used to realize the digital integration in real time. After rectification and integration, the drift is almost linear and stable in controlled temperature, so a period of 50 s is used to determine the linear drift rate for drift compensation. The integration data can be directly transferred to the reflective memory (RFM) card, which is installed in the same PCI eXtensions for Instrumentation (PXI) chassis, so the data transmission can be also done in real time. The test results show that the real time data transmission rate is up to 10 kHz, the integration drift is typically less than 0.4 uVs/s and drift performance is a little worse in real long pulse discharge, which can be reduced further by using more precise data acquisition.