A three-dimensional edge-crack finite element for fracture mechanics applications

A three-dimensional extension of a previously published two-dimensional cracked finite element [Potirniche, G.P., Hearndon, J., Daniewicz, S.R., Parker, D., Cuevas, P., Wang, P.T., Horstemeyer, M.F., 2008. A two-dimensional damaged finite element for fracture applications. Engineering Fracture Mechanics 17(13), 3895–3908] is presented in this paper. The new element has an embedded edge crack, and was developed to model damage in three-dimensional structures using the finite element method. The element simulates the presence of a crack without physically inserting it in the three-dimensional finite element mesh. The method involves the derivation of a modified stiffness matrix that accounts for the change in the element flexibility due to the crack presence. The cracked element was analytically formulated and implemented in the finite element code ABAQUS Standard as a User-defined Element (UEL) subroutine. Tests of various cracked beam configurations were used to estimate the accuracy of the element by comparing two models: one with a UEL and another with an embedded edge crack. Beam deflections and natural frequencies were analyzed and compared for the two models. The results indicate that the new element has a good potential in modeling cracks in three-dimensional parts. Moreover, the method using this UEL computes the global response of damaged structures, in which cracks can be placed at various locations and in an unlimited number.