کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
309115 513582 2013 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental investigation of channel-section composite profiles’ behavior with various sequences of plies subjected to static compression
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
Experimental investigation of channel-section composite profiles’ behavior with various sequences of plies subjected to static compression
چکیده انگلیسی


• The obtained results showed both qualitative and quantitative conformities of critical load found by numerical calculations with experimental outcomes.
• The results allowed to estimate the influence of the composite′s ply sequence on the value of critical load.
• The higher critical load was observed, in the case of structures, in which the 0°-plies were located in the vicinity of the layup′s symmetry plane.

This paper deals with the buckling of thin-walled channel-section composite columns subjected to static compression. It was assumed that the columns were supported with articulated joints at both ends. For experimental testing, three series of specimens were manufactured with autoclaving technique. The specimens had identical dimensions but differed about ply sequence. The Hexcel′s HexPly M12 carbon-epoxy prepreg was used in order to fabricate the channel-section profiles. During the stand tests minimal critical forces of the real structure and the corresponding buckling modes were determined with an application of electrical strain gauges. In addition, post-critical equilibrium paths for small overloads—150% of the critical load for the ideal structure—were determined. The experimental results were compared to the ones obtained numerically with the finite element method (FEM).

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin-Walled Structures - Volume 71, October 2013, Pages 147–154
نویسندگان
, , ,