Dynamic behavior of a single-phase self-excited induction generator using a three-phase machine feeding single-phase dynamic load

This paper is motivated to analyze the transient behavior of a single-phase self-excited induction generator (SEIG) using a three-phase machine due to switching of single-phase dynamic load like induction motors. The generator consists of a three-phase star connected induction machine excited with three-capacitors and a single-phase induction motor (IM) load. The developed dynamic models of the SEIG and the motor are based on stationary reference frame d–q axes theory incorporating the effect of cross-saturation in the magnetic circuit of the machine and the equations of excitation capacitors are described by three-phase abc model. The system suffers from heavy transients during switching of induction motor and becomes unstable. These problems may be due to resonance caused by series capacitors and the inductive motor load. The use of damping resistors across one series capacitor is proposed to damp out the starting transients for the stable operation. The motor can be started up successfully using the damping resistor. The variation of the damping resistance with the increase in load on the motor after successful starting to maintain constant terminal voltage has been presented. The eigenvalue technique is also employed to examine the transient conditions in the studied SEIG-IM system. The simulated and experimental results are presented for both the unsuccessful and successful starting of the motor. These results are in close agreement with each other, which show the effectiveness of the approach.

► Three-phase induction machine is used as single-phase generator.
► Dynamic behavior of single-phase SEIG feeding dynamic load.
► Algorithm has been developed for selection of damping resistance.
► Experimental results show close agreement with simulated result.
► Eigenvalue analysis has been performed.