Preparation of ion exchanger layered electrodes for advanced membrane capacitive deionization (MCDI)

A noble electrode for capacitive deionization (CDI) was prepared by embedding ion exchanger onto the surface of a carbon electrode to practice membrane capacitive deionization (MCDI). Bromomethylated poly (2, 6-dimethyl-1, 4-phenylene oxide) (BPPO) was sprayed on carbon cloth followed by sulfonation and amination to form cation exchange and anion exchange layers, respectively. The ion exchange layers were examined by Scanning electron microscopy (SEM) and Fourier transform infrared spectrometer (FT-IR). The SEM image showed that the woven carbon cloth was well coated and connected with BPPO. The FT-IR spectrum revealed that sulfonic and amine functional groups were attached on the cationexchange and anionexchange electrodes, respectively. The advantages of the developed carbon electrodes have been successively demonstrated in a batch and a continuous mode CDI operations without ion exchange membranes for salt removal using 100 mg/L NaCl solution.

► Treatment of carbon electrode for improving ion selectivity.
► Formation of ion exchange layer onto electrode surface by functionalization of air-sprayed polymer layer.
► Examination of the prepared electrode and cell test.
► The electrode enables to remove 83% of 100 mg/L salt at 23.07 mWh of power consumption.