Shifted gray encoding to reduce instruction memory address bus switching for low-power embedded systems

Gray code bus encoding is a simple approach to reduce instruction address bus switching. It requires little encoding hardware and no additional bus lines. Our analytical study reveals that with Gray encoding the address bus switching can be reduced by nearly 50%, for long, sequentially accessed code.However, existing Gray bus encoding techniques involve decoding the Gray coded bus, which is expensive in terms of performance and area, and has stymied efforts to implement such a coding scheme in real systems. Furthermore, based on our experimental investigation on a set of benchmarks, the Gray bus encoding may be much less effective than expected – the switching reduction rate can be as low as under 30%.This paper presents a design approach to enable the use of Gray encoding by avoiding the bus decoding operation and to enhance the switching reduction efficiency by using a shifted Gray code for a given application. The experiment results show that our design approach can improve bus switching reduction rate by up to 22.55%, with little overhead on design logic and performance.