Assessment of HCLL-TBM optimum welding sequence scenario to minimize welding distortions

One of the technical lock of this study is high calculation times needed for this large component which implies to set up a simplified welding simulation method. The study is composed of three main phases: an experimental-numerical study of a T-joint fillet mock-up GTAW used to develop the preliminary welding procedure and to validate a simplified simulation method, a numerical optimization of the v-SP to box welding sequence via the simplified method, and the experimental application of the optimized v-SP to Box welding sequence on the TBM mock-up. The calculation and comparison of four different v-SP to box welding sequences allowed to identify the best sequence regarding welding distortions and to apply it experimentally.