کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4976784 1451836 2018 16 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Modeling of low frequency dynamics of a smart system and its state feedback based active control
ترجمه فارسی عنوان
مدل سازی دینامیک فرکانس پایین یک سیستم هوشمند و بازخورد حالت آن بر کنترل فعال است
کلمات کلیدی
سیستم هوشمند مدل سازی ریاضی، تکنیک قرار دادن قطعه، کنترل لرزش فعال
ترجمه چکیده
سیستم های اصلی / سازه های اصلی از ارتعاشات ناخواسته رنج می برند. برای کارآیی کارآیی چنین سیستمی، این لرزش باید کنترل شود. در این مقاله، مدلسازی ریاضی یک پرتو کانال آلومینیومی با تکه های پیزوالکتریک چندگانه پیوندی که به عنوان ژنراتور اختلال، سنسور و همچنین کنترل کننده ای عمل می کنند، ارائه شده است. این پرتو کانتینر لایهای پیزوالکتریک تنها در یک درجه آزادی تنها در حالت خمشی عمل می کند و مدل های فضایی حالت مربوطه با استفاده از تکنیک عنصر محدود به دست می آید. حالت های غالب ارتعاش خمشی از پاسخ فرکانسی مدل توسعه یافته سیستم شناسایی می شود و در نهایت یک کنترل کننده بازخورد حالت مبتنی بر تکنیک قرار دادن قطبها طراحی شده است تا به طور فعال موجب مهار ارتعاشات شود. از طریق شبیه سازی های متعدد و همچنین اعتبار سنجی آزمایشی، اثربخشی کنترل کننده فعال در مهار ارتعاشات در فرکانس های مختلف تحریک و همچنین فرکانس های فرکانس در طول حالت خمشی ایجاد می شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر پردازش سیگنال
چکیده انگلیسی
Major physical systems/structures suffer from unwanted vibrations. For efficient working of such systems, these vibrations have to be controlled. In this paper, mathematical modeling of an aluminum cantilever beam with bonded multiple piezoelectric patches which act as the disturbance generator, sensor as well as control actuator has been presented. This piezoelectric laminate cantilever beam is assumed to be vibrating in a single degree of freedom i.e. in the flexural mode only and the corresponding state space models have been derived analytically using the finite element technique. Dominant modes of flexural vibration are identified from the frequency response of the developed model of the system and finally a state feedback controller based on pole placement technique is designed to actively suppress the vibrations. Through numerous simulations as well as experimental validation, the effectiveness of the active controller in damping the vibrations at various excitation frequencies as well as frequency ranges along the flexural mode is established.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanical Systems and Signal Processing - Volume 99, 15 January 2018, Pages 774-789
نویسندگان
, ,