کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4986103 | 1454796 | 2017 | 15 صفحه PDF | دانلود رایگان |
- Substantiall performance improvements for textured/hydrophobic pivoted thrust bearings.
- Superior tribological behavior of pocket and circumferentially grooved bearings.
- Minimum film thickness increases up to 24% for certain textured bearings.
- Hydrophobicity shows great potential for load capacity increase and friction reduction.
In the present study, a computational investigation of thermohydrodynamic lubrication in pivoted-pad thrust bearings exhibiting different types of surface treatment is presented. Five different types of pivoted-pad thrust bearings are cross-evaluated for operation at different combinations of thrust load and rotational speed: (a) a pocket bearing, (b) a bearing with circumferential grooves, (c) a bearing with radial grooves, (d) a bearing with rectangular texturing, and (e) a hydrophobic bearing. A parametric analysis is conducted to identify the effect of the main design parameters (machining depth, radial/circumferential machining extents, slip length, radial/circumferential hydrophobic extents) on bearing performance. The performance gains obtained by each surface treatment type are evaluated against the performance of a conventional plain bearing of the same principal dimensions.
Journal: Tribology International - Volume 110, June 2017, Pages 426-440