کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4993808 | 1458024 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Experimental investigation on flow condensation in horizontal tubes filled with annular metal foam
ترجمه فارسی عنوان
بررسی تجربی بر تراکم جریان در لوله های افقی پر شده با فوم حلقه ای
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فوم فلزی، تراکم جریان، انتقال گرما، افت فشار،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
This work studies the heat transfer and pressure drop of water vapor flow condensation in horizontal tubes filled with annular metal foam of three different sizes (10, 15 and 20Â PPI). The range of vapor mass flow rate is 20-100Â kg/h and cooling water flow rate is 1-3Â m3/h. The flow condensation characteristic in metal foam tubes is presented and compared with corresponding micro-fin tubes by using unit mass efficiency coefficient method. The effects of metal foam size, inlet vapor pressure, vapor mass flow rate, and cooling water temperature on heat transfer and pressure drop are examined and analyzed. Heat transfer and pressure drop correlations for horizontal tubes with annular metal foam are obtained by curve-fitting of the experimental values. The results indicate that the introduction of metal foam enhances the heat transfer although resulting in a larger pressure drop. Metal foam of 10Â PPI size exhibits the superior performance. The average heat transfer coefficient is also observed to increase with higher inlet vapor pressure, higher vapor mass flow rate and higher cooling water temperature.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 116, January 2018, Pages 920-930
Journal: International Journal of Heat and Mass Transfer - Volume 116, January 2018, Pages 920-930
نویسندگان
Juan Shi, Gonghang Zheng, Zhenqian Chen,