کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4994691 1458037 2017 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Numerical prediction of wax deposition in oil-gas stratified pipe flow
ترجمه فارسی عنوان
پیش بینی عددی رسوبات موم در جریان لوله طبقه بندی شده نفت گاز
کلمات کلیدی
گواهی، نفت، جریان طبیعی نفت، خط لوله،
ترجمه چکیده
رسوب موم در جریان لوله دو فاز نفت گاز می تواند یک مسئله تضمین جریان قابل توجهی باشد. هنگامی که جریان فاز گاز درگیر می شود پیچیده می شود. در این کار، یک مدل عددی برای رسوب واکنش برای جریان لوله ای صاف شده با گاز نفتی پیشنهاد شده است. یک مدل عددی جریان یک جهته برای محاسبه هیدرودینامیک غیر حرارتی، انتقال گرما و جرم استفاده می شود. لایه ی رسوب موم فرض شده است که یک لایه متخلخل رو به رشد است که باعث انتشار مولکول های موم از طریق یک محیط متخلخل می شود. عملکرد محاسبات عددی با آزمایش جریان مقیاس آزمایشگاهی نشان داده شده است. این مدل می تواند توزیع محدب غیر یکنواختی سپرده موم را بر دیوار لوله داخلی، یعنی یک شکل هلال، ارائه دهد، و ضخامت پیش بینی شده ی رسوب با افزایش سرعت گاز سطح سطحی و سرعت روغن سطحی افزایش می یابد. روند پیش بینی مدل ها با نتایج آزمایش آزمایشگاهی مقادیر رضایت بخش را مقایسه می کند. علاوه بر این، مشخص شده است که تنظیم پیکربندی رابط گاز و گاز باید به حساب سپرده موش پرداخت شود. متاسفانه این در تمام مطالعات قبلی در نظر گرفته نشده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Wax deposition in oil-gas two-phase pipe flow can be a significant flow assurance problem. It becomes complicated when gas phase flow is involved. In this work, a numerical model is proposed for the wax deposition for oil-gas stratified smooth pipe flow. A unidirectional flow numerical model is used to calculate the non-isothermal hydrodynamics, heat and mass transfer. The wax deposit layer is assumed to be a growing porous layer, which caused by the diffusion of wax molecules through a porous medium. The numerical calculation performance is illustrated by the lab-scale flow experiment. The model could give the non-uniformly circumferential distribution of wax deposit on the inner pipe wall, i.e. a crescent shape, and the predicted deposit thickness is shown to increase with an increasing in superficial gas velocity and superficial oil velocity. The trends in the model predictions compare satisfactorily with those from lab-scale experimental results. In addition, it was found that the concave-down configuration of the oil-gas interface must be taken into accounted for the wax deposit. Unfortunately, this has not been taken into account in all previous studies.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 105, February 2017, Pages 279-289
نویسندگان
, , , , , ,