Polyaniline based microtubes as building-blocks for artificial muscle applications

Morphology is a key element in the functionality of low dimensional structures including here electroactive polymers, especially when applications such as muscle like actuators are sought. The reason is that morphology in the context of a high specific surface object strongly influences specific parameters such as ionic diffusion, conductivity and consequently the actuation capability of the system. In the present work a new architecture for microtube-based actuating elements is presented. Free-standing fibrillar microtubes with diameter in the range of micrometers and with a core-shell polyaniline/gold structure are fabricated through a scalable approach. Aligned electrospun poly(methyl methacrylate) fibers are coated with gold and are further employed as microstructured electrodes for the electrochemical deposition of polyaniline. Further the poly(methyl methacrylate) core was dissolved, leading to a tubular structure. The polyaniline/gold microtubes show complex, rapid and reversible movement patterns, with great stability and consistency over repeated actuation cycles. Thus, when the potential is swept between −0.2 and 1 V at different rates, the microtubes move, this movement being associated with the morphological and structural characteristics of the deposited polyaniline layer, a mechanism based on the expansion/contraction and conformational changes of the polymer chains due to the insertion/expulsion of ions. The response time of these electroactive microstructures during one cycle is in the range of seconds, a consequence of their low dimensionality and specific structure. Moreover the actuation takes place in different electrolytes including simulated gastric fluid, which enables a wide range of applications.