کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5017565 | 1466715 | 2018 | 21 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Investigations on microstructure and grain orientation uniformity of Ti-17 titanium alloy under different hot deformation modes
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this paper, the microstructure and grain orientation uniformity of Ti-17 titanium alloy under high temperature compression and axial upsetting and drawing processing (AUDP) conditions were investigated by light microscopy (LM) and electron backscatter diffraction (EBSD) technique. The relationship between the microstructure and grain orientation evolution in different hot working modes and hot deformation parameters was systematically investigated. The results indicate that grain size of β phase affects the precipitation behavior of α phase, the smaller β grains resulting in a higher grain misorientation angle, thereby improving grain orientation uniformity of the material. AUDP can obtain finer uniformity microstructure, but the homogeneity of β phase grain orientation has not been obviously improved and the anisotropy of the β matrix still exists. Subsequently, when annealing in the (α + β) region, the grain growth and the interface become more clearly, but the annealing process cannot eliminate the macro-zones induced by the β phase with a grain orientation concentrated area.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 252, February 2018, Pages 148-158
Journal: Journal of Materials Processing Technology - Volume 252, February 2018, Pages 148-158
نویسندگان
S.H. Chen, M.C. Zhang, M.L. Jia, W. Li,