کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5017591 | 1466715 | 2018 | 31 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Numerical simulation of temperature field and prediction of microstructure in friction hydro pillar processing
ترجمه فارسی عنوان
شبیه سازی عددی میدان مغناطیسی و پیش بینی ریزساختار در پردازش آبی اصطکاک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
اصطکاک پردازش آبی ستون، شبیه سازی عددی، رابط اصطکاک زمینه دما، لایه پلاستیک فلزی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
This paper presented a study about the frictional interface (FI), plastic metal layer, temperature field and microstructure in the friction hydro pillar processing (FHPP).The dynamic mesh was used to simulate the continuous motion and deformation of the FI. The simulated low-viscosity-area (below 9.0 Ã 106 Pa s) had similar position and shape to the plastic metal layer in the actual weld and was used to describe this plastic metal layer. The temperature rose with the increasing burn-off of the plug. The peak temperature at FI appeared near the side of the plug. The simulated thermal cycles were chosen to predict the cooling condition and the microstructure in the heat affected zone. The simulation results showed the coincidence with the actual welds.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 252, February 2018, Pages 370-380
Journal: Journal of Materials Processing Technology - Volume 252, February 2018, Pages 370-380
نویسندگان
Wukai Li, Desheng Jiang, Lijun Yang, Jiajing Pan, Rui Qu, Tao Sun,