کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5195252 1381341 2017 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Cure shrinkage defects in epoxy resins
ترجمه فارسی عنوان
نقص انقباض در رزین اپوکسی را درمان کنید
کلمات کلیدی
ترجمه چکیده
شکل گیری ضایعات انقباض در هشت ترکیب اپوکسی در طی درمان ایزوترمال در یک کشتی محدود شده مورد بررسی قرار گرفت. برای یک رزین اپوکسی ممکن است سه درجه از درجه حرارت درمان ایزوترمال مشخص شده توسط نوع نقص های تکین ایجاد شده وجود داشته باشد. مرزهای محدوده برای هر پلیمر یکسان هستند. مکانیزم آسیب رساندن به ضخامت و نوع نقص در ابتدا توسط فرایندهای ژلینگ و شیشه سازی تعریف شده است. وابستگی فرآیندهای به دما منجر به تغییر قابل توجهی در تأثیر نوع تشخیص نقص می شود و مرزهای محدوده دما را تعریف می کند. مقدار نقصهای انسانی به محدوده دما تا حد زیادی و ترکیب شیمیایی پلیمری به میزان کمتر بستگی دارد. فرسایش ممکن است باعث ایجاد نقص در انقباض در پلیمرهای شبکه و خطی شود.
موضوعات مرتبط
مهندسی و علوم پایه شیمی شیمی آلی
چکیده انگلیسی
The formation of shrinkage defects in eight epoxy compositions was investigated during isothermal cure in a constraining vessel. For an epoxy resin there may be three ranges of isothermal cure temperatures distinguished by the type of cohesive defects formed. The boundaries of the ranges are individual for each polymer. The mechanisms of shrinkage damage and type of defects are defined initially by gelation and vitrification processes. Dependence of the processes upon temperature leads to a dramatic change in the influence of the type of defect formation and defines the boundaries of the temperature ranges. The quantity of cohesive defects depends on temperature range to a large extent and polymer chemical composition to a lesser extent. Vitrification may be the cause of shrinkage defect formation in both network and linear polymers.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer - Volume 36, Issue 10, May 1995, Pages 2013-2017
نویسندگان
, , , , ,