Investigating the role of metal oxidation state on the degradation behaviour of LDPE

Transition metal stearates have been reported to act as effective pro-oxidants for polyethylene, even at trace concentrations. This study is an attempt to investigate the effect of the oxidation state of a metal on its pro-oxidant nature. Three metal stearates, namely manganese, iron and cobalt, in their common oxidation states (+2 and +3), were synthesized and their effect on the photo-oxidative and thermo-oxidative degradation of low-density polyethylene (LDPE) films has been investigated. Films of 70 ± 5 μ were prepared by film blowing technique, exposed to xenon arc weatherometer and air oven at 70 °C for extended time periods. The chemical and physical changes induced by this exposure were followed by monitoring the changes in mechanical properties (tensile strength and elongation at break), carbonyl index (CI), molecular weight (viscometry), MFI, density, and thermal properties. The results were analysed to explain the structural and chemical modifications taking place in the polymeric matrix as a result of aging. The studies reveal that the oxidation state of the metal did not affect its ability to initiate and accelerate degradation. The thermo-oxidative degradation in the presence of metal stearate was found to follow the order: cobalt > manganese > iron. However, iron stearate was capable of initiating photo-oxidative degradation to the same extent as cobalt and manganese, in the concentration range investigated. The results indicate that iron is primarily an effective photo-oxidant, while cobalt and manganese can act both as photo-oxidant as well as thermo-oxidant.