Measurement and quantitative analysis of fiber orientation distribution in long fiber reinforced part by injection molding

The fiber orientation distribution is one of the important microstructure variables for thermoplastic composites reinforced with discontinuous fibers. In this paper, the long fibers in the injection molded part are measured in detail by micro X-ray CT. A three dimensional (3D) structure of the sample is built and two dimensional images are generated for image analysis. The orientation tensor of fibers is calculated in the flow plane. It shows a symmetric distribution of fibers through the thickness direction, which consists of outer skin, transition zone and the core. The skin layer is so thin that it has only one layer of highly oriented fibers. The core layer also has highly oriented fibers but the direction of fibers is different from that in the skin layer. Nevertheless, the clustering of the fibers is characterized quantitatively in the core. The transition zone can be divided into two subzones by the principal directions of the tensor.