The impact of Martian aerosols on the retrieval of temperature profiles from PFS measurements

Our purpose was a qualitative assessment of the impact of dust and water ice aerosols on the retrieved temperature profiles and the retrieval process itself in the Martian atmosphere. It aims to quantify the related uncertainties in the atmospheric temperature profiles derived from radiance measurements of the Planetary Fourier Spectrometer (PFS), currently operating on the Mars Express orbiter. In this study the effects of aerosol opacities on simulated data and retrieved temperature profiles were also investigated.From the analysis of the model atmosphere including dust and water ice with different size distributions it results that the dust component affects weighting functions and brightness temperatures less than water ice. A similar situation is also observed when different vertical distributions are considered. Unlike dust, water ice with different sizes of crystals evidently influences weighting functions and brightness temperatures. The impact of the considered water ice vertical distributions on brightness temperatures is noticeable only near 840 cm−1.Considering different dust opacities, the largest differences-5 K maximum-between retrieved temperature profiles were observed close to the surface, regardless assumptions on a size distribution or the refractive indices. Contrary to dust, the different sizes of water ice particles assumed during retrieval stronger affected the retrieved temperature profiles than water ice opacities. Moreover, the differences in the retrieved temperature profiles were amplified while wrong optical properties for dust as well as for water ice aerosol were assumed instead of the nominal case. This means that the wrong assumption can induce an additional source of the retrieval error and lead to unreasonable temperature profiles. In the cases of expected heavily loads water ice crystals, their size distribution in the Martian atmosphere should be known from other observations before the retrieval of the temperature profile is attempted.For the analyzed examples of real PFS measurements the impact of different dust vertical distributions on the retrieval of temperature profile is prominent only in layers close to the surface. However, these differences remain comparable with retrieval errors. All influences of dust on weighting functions, brightness temperatures and during retrieval can be neglected if the noise equivalent radiance (NER) of PFS is taken into account.