کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5440775 | 1398238 | 2016 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of processing temperature on microstructures and mechanical behaviours of reactive hot-pressed SiC(SCS-6)/Ti/ZrB2-ZrC hybrid composites
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this study, hybrid composites comprising SiC(SCS-6)/Ti composite and ZrB2-ZrC ceramics were prepared by sandwiching Ti/SiC(SCS-6)/Ti sheets and Zr + B4C powder layers, followed by reactive hot pressing (RHPing) between 1250 °C and 1400 °C. The effects of RHPing temperature on the microstructures and the mechanical behaviours of the composites were examined. For the samples prepared at 1250 °C and 1300 °C, a Ti-rich zone was observed in the matrix and around the fibres. However, for the sample prepared at 1400 °C, no Ti-rich zone was observed. In addition, the hybrid composites show noncatastrophic fracture behaviour, irrespective of RHPing temperature. Compared to the sample processed at 1400 °C, the samples processed at 1250 °C and 1300 °C exhibited higher flexural strength and greater damage tolerance. The lower strength and damage tolerance for the composite processed at 1400 °C are attributed to stronger interface bonding via significant degradation of the C-rich coating and to strength degradation of the fibres.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 36, Issue 16, December 2016, Pages 3851-3861
Journal: Journal of the European Ceramic Society - Volume 36, Issue 16, December 2016, Pages 3851-3861
نویسندگان
Shuqi Guo,