کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5440896 | 1398240 | 2017 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of titanium aluminum carbides neutron irradiated at 400-700 °C
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This work reports the first mechanical properties of Ti3AlC2-Ti5Al2C3 materials neutron irradiated at â¼400, 630 and 700 °C at a fluence of 2 Ã 1025 n mâ2 (E > 0.1 MeV) or a displacement dose ofââ¼2 dpa. After irradiation at â¼400 °C, anisotropic swelling and loss of 90% flexural strength was observed. After irradiation at â¼630-700 °C, properties were unchanged. Microcracking and kinking-delamination had occurred during irradiation at â¼630-700 °C. Further examination showed no cavities in Ti3AlC2 after irradiation at â¼630 °C, and MX and A lamellae were preserved. However, disturbance of (0004) reflections corresponding to M-A layers was observed, and the number density of line/planar defects was â¼1023 mâ3 of size 5-10 nm. HAADF identified these defects as antisite TiAl atoms. Ti3AlC2-Ti5Al2C3 shows abrupt dynamic recovery of A-layers from â¼630 °C, but a higher temperature appears necessary for full recovery.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 37, Issue 6, June 2017, Pages 2353-2363
Journal: Journal of the European Ceramic Society - Volume 37, Issue 6, June 2017, Pages 2353-2363
نویسندگان
Caen Ang, Chad M. Parish, Chunghao Shih, Chinthaka Silva, Yutai Katoh,