Field Measurement of Amine Aerosol by FTIR and Phase Doppler Interferometry

Phase Doppler Interferometry (PDI) and FTIR sampling were performed simultaneously at the National Carbon Capture Center. Using a blower between the water wash and absorber column instead of upstream of the absorber column resulted in a decrease in MEA emissions. The use of the intermediate blower instead of the upstream blower resulted in fewer, smaller aerosol drops. Decreasing the CO2 removal resulted in reduced amine aerosol emissions. Lower CO2 correlated with a lower aerosol concentration in the treated flue gas, but the aerosol sizes were significantly larger and resulted in overall increased amine emissions. Increasing the water wash temperature was found to increase average aerosol size and the amine concentration within the aerosol phase, resulting in an overall increase in amine emissions. By using the particle size distribution and aerosol concentration observed by PDI, the total liquid volume in the aerosol phase was calculated. Comparing this calculated quantity with the amine emissions observed using the FTIR allowed the approximate amine concentration in the aerosol phase to be determined.