کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5492928 | 1526260 | 2017 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Injection optimization through generation of flat ion beams
ترجمه فارسی عنوان
بهینه سازی تزریق از طریق تولید پرتو یون مسطح
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تزریق، از دست دادن، تحول جامد به مسطح، کاهش امیتر،
موضوعات مرتبط
مهندسی و علوم پایه
فیزیک و نجوم
ابزار دقیق
چکیده انگلیسی
An excellent interfacing between injector linac and synchrotron is mandatory to provide ion beams of unprecedented intensities and qualities. One consequence of the single-plane Multi-Turn Injection (MTI) is that the required injection emittance for the injection plane (usually the horizontal one) is very demanding; to the other plane not. Re-partitioning of the injected beam emittances, i.e. round-to-flat transformation would increase the injection efficiency. This benefit effect to the MTI performance of a smaller emittance has been measured as a function of the amount of flatness of the beam. An excellent agreement between simulation and measured injection performance as a function of the injected emittance was achieved thanks to fast adjustment of the beam flatness without changing other beam parameters.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment - Volume 866, 11 September 2017, Pages 36-39
Journal: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment - Volume 866, 11 September 2017, Pages 36-39
نویسندگان
S. Appel, L. Groening, Y. El Hayek, M. Maier, C. Xiao,