Influence of temperature on erosion by a cavitating liquid jet

The influence of water temperature on cavitation erosion has previously been studied using a vibratory apparatus, but no researches have been conducted at a constant cavitation number in flow condition. This study deals with the influence of the water temperature on cavitation erosion using a cavitating jet apparatus. The optimum stand-off distance at 25 °C was 11, 15, 21 and 25 mm at cavitation number of σ = 0.03, 0.025, 0.02 and 0.015, respectively, and was almost the same as that of a guideline in the ASTM G134 standard. The optimum stand-off distance at 75 °C is similar to that at 25 °C. The erosion rate increases with the liquid temperature and reaches a peak, followed by a decrease. The relative temperature was defined as 0 °C for freezing temperature and 100 °C for boiling temperature of pressurized water. The peak appears at the approximate average of freezing and boiling relative temperatures. The erosion rate increases by 1%/ °C between 5 and 45 °C of relative temperatures, and decreases by 2%/ °C between 45 and 80 °C.