Electrochemical degradation of the dimethyl phthalate ester on a fluoride-doped Ti/β-PbO2 anode

The electrooxidation of the dimethyl phthalate (DMP) ester was galvanostatically carried out in a filter-press reactor using a fluoride-doped lead dioxide (β-PbO2,F) film electrodeposited on a Ti substrate. The variables investigated were the nature of the supporting electrolyte (NaCl and Na2SO4), pH (3, 7, and 10), current density (10, 20, 40, 60, and 80 mA cm−2), and temperature (10, 20, 30, 40, and 50 °C). The removal of DMP was monitored through high performance liquid chromatography (HPLC) and total organic carbon (TOC) analysis. The best conditions were obtained using Na2SO4 and at low current densities, independent of the solution pH or temperature. These conditions led to the highest levels of current efficiencies and complete combustion. However, the TOC removal levels were low, due to the generation of highly oxidized intermediates, which was confirmed by the intermediates detected by HPLC.