کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6354078 1622638 2016 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of shape and size of the particles on jigging separation of plastics mixture
ترجمه فارسی عنوان
تأثیر شکل و اندازه ذرات در جداسازی مخلوط پلاستیک
کلمات کلیدی
پلاستیک جداسازی جیگ، تراکم، اندازه ذرات، شکل ذرات،
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی


- Plastics jigging separation depends on the density, size and shape of the particles.
- For regular particles the separation improved with the particle size.
- In lamellar particles the influence of the particle size was minimal.
- Shape is less influential than density, for fine sized particles.
- Best results for lighter lamellar shape against dense spherical shaped particles.

Plastics are popular for numerous applications due to their high versatility and favourable properties such as endurance, lightness and cheapness. Therefore the generation of plastic waste is constantly increasing, becoming one of the larger categories in municipal solid waste.Almost all plastic materials are recyclable, but for the recycling to be possible it is necessary to separate the different types of plastics. The aim of this research was to evaluate the performance of the jig separation of bi-component plastic mixtures. For this study six granulated plastics had been used: Polystyrene (PS), Polymethyl methacrylate (PMMA), Polyethylene Terephthalate (PET-S, PET-D) and Polyvinyl Chloride (PVC-M, PVC-D).Plastics mixtures were subjected to jigging in a laboratorial Denver mineral jig. The results showed that the quality of the jigging separation varies with the mixture, the density differences and with the size and shape of the particles. In the case of particles with more regular shapes the quality of separation of bi-component plastic mixtures improved with the increase of the particle size. For lamellar particles the influence of particle size was minimal.In general, the beneficiation of plastics with similar densities was not effective, since the separation efficiency was lower than 25%. However, in bi-component plastic mixtures that join a low density plastic (PS) with a high density one (PMMA, PET-S, PET-D, PVC-M and PVC-D), the quality of the jigging separation was greatly improved. The PS grade in the sunk was less than 1% for all the plastic mixtures.Jigging proved to be an effective method for the separation of bi-component plastic mixtures. Jigging separation will be enhanced if the less dense plastic, that overflows, has a lamellar shape and if the denser plastic, that sinks, has a regular one.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Waste Management - Volume 48, February 2016, Pages 89-94
نویسندگان
, ,