کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6477791 1427603 2017 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The use of oxidising agents for control of electrochemical potential in flotation
ترجمه فارسی عنوان
استفاده از اکسید کننده ها برای کنترل پتانسیل الکتروشیمیایی در شناور
کلمات کلیدی
الکتروشیمی، پتانسیل، گردآورنده، عوامل اکسید کننده،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی


- Eh was altered while holding pH constant at two different levels.
- 0.1 M concentrations of H2O2 and NaClO raised Eh without increasing sulphide recovery.
- H2O2 and NaClO at 0.001 M raised Eh to 200-300 mV improving sulphide recovery.

Relating flotation performance to the electrochemical characteristics of a pulp remains a complex issue both in fundamental research and in practice. For example, in the case of thiol collectors different Eh values can result in the formation of the dimer or the metal thiolate which may or may not enhance the hydrophobicity of the mineral. Reducing or oxidising conditions in a flotation system, viz. changing the Eh value, are usually manipulated to achieve an optimum flotation response by the control of pH and dissolved oxygen levels in the system. It is also possible to vary the potential by the addition of modifiers such as sodium hydrosulphide (NaHS), sodium hypochlorite (NaClO) and hydrogen peroxide (H2O2). The objective of the present study was to investigate the effect of the addition of the oxidising agents, NaClO and H2O2, on valuable mineral recoveries and grades in the flotation of sulphides from a PGM bearing Merensky ore. Batch flotation tests were conducted at pH 9.2, the natural pH of the system, in the absence and presence of a xanthate collector and Eh modifiers, viz. NaClO or H2O2. Most importantly in this way it was possible to vary Eh at constant pH and DO levels. The results indicate that in the absence or presence of xanthate the addition of H2O2 reduced both the recovery and grade of copper and nickel. In the absence of xanthate, the addition of NaClO improved the recovery of copper slightly and both the recovery and grade of nickel significantly, but in the presence of xanthate NaClO addition resulted in unchanged copper recovery and grade, but those of nickel were reduced. Based on anecdotal evidence that the addition of trace amounts of a potential modifier could improve flotation performance further tests were conducted the results of which suggest improved flotation performance.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Minerals Engineering - Volume 109, 1 August 2017, Pages 135-143
نویسندگان
, , , ,