Experimental study of temperature field in a solar chimney power setup

A pilot experimental solar chimney power setup consisted of an air collector 10 m in diameter and an 8 m tall chimney has been built. The temperature distribution in the solar chimney power setup was measured. Temperature difference between the collector outlet and the ambient usually can reach 24.1 °C, which generates the driving force of airflow in the setup. This is the greenhouse effect produced in the solar collector. It is found that air temperature inversion appears in the latter chimney after sunrise both on a cool day and on a warm day. Air temperature inversion is formed by the increase of solar radiation from the minimum and clears up some time later when the absorber bed is heated to an enough high temperature to make airflow break through the temperature inversion layer and flow through the chimney outlet.