کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
651633 1457427 2013 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Heat dissipation performance of MWCNTs nano-coolant for vehicle
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
Heat dissipation performance of MWCNTs nano-coolant for vehicle
چکیده انگلیسی
This study demonstrates the heat dissipation performance of a motorcycle radiator filled with multi-walled carbon nanotubes (MWCNTs) nano-coolant (NC). The two-step synthesis method was used to produce different concentrations of MWCNTs/water (W) nanofluid (0.1, 0.2, and 0.4 wt.%) using a 0.4 wt.% cationic chitosan dispersant, and the MWCNTs/W nanofluid was mixed with ethylene glycol (EG) at a 1:1 volume ratio to form the NC1, NC2, and NC3. The experiments in this study measured the thermal conductivity, viscosity and specific heat of NC with weight fractions and sample temperatures (80, 85, 90, and 95 °C), and then used the NC in an air-cooled radiator for a motorcycle to assess its heat exchange capacity, Nusselt number and pumping power under different volumetric flow rates (4.5, 6.5, and 8.5 L/min) and sample temperatures (80, 85, 90, and 95 °C). Considering the overall efficiency of the heat exchange system, this study evaluates the relationship of heat exchange capacity and the pumping power using the efficiency factor (EF). Experimental results show that the NC1 has a higher heat exchange capacity and EF than EG/W. The maximum enhanced ratios of heat exchange, pumping power, and EF for all the experimental parameters in this study were approximately 12.8%, 4.9%, and 14.1%, respectively, compared with EG/W. NC with high concentrations of MWCNTs cannot achieve a better heat exchange capacity because the uneven density of NC in the flow state increases the thermal resistance of the solid-liquid interface, effectively decreasing the contact area between the MWCNTs and the EG/W.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Experimental Thermal and Fluid Science - Volume 49, September 2013, Pages 22-30
نویسندگان
, ,