Optimal thermodynamic and economic volume of a heat recovery steam generator by constructal design

The ratios of gas flow to steam flow are huge in heat recovery steam generators (HRSGs) compared to other steam generators. So the volume which is occupied by components of the HRSG such as economizer, evaporator and superheater is important factor when the HRSG is applied in structures including buildings and ships. The optimum volume of a HRSG is deduced through optimization of entropy generation and cost evaluation. By increasing volume, second law of thermodynamics is improved, but this improvement may not be economical. In this work, the best dimensions and arrangements of flows in HRSG are obtained by constructal design and the optimization method is algorithm genetic. In this case, super heater temperature, pinch point, water/steam flow rate and gas pressure drop are derived from configuration which designed by constructal theory for HRSG. The effects of gas flow rate and inlet gas temperature are examined on the values of optimum volume.