کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6589647 | 456847 | 2015 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of fluid-mechanical parameters on volumetric mass transfer coefficient in a spout-fluid bed with a draft tube
ترجمه فارسی عنوان
تأثیر پارامترهای مایع مکانیکی بر ضریب انتقال جرمی حجمی در یک تخت مایع با یک لوله پیش ساخته
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سیستم سه فاز اسپادا مایع مایع، لوله مکش، ضریب انتقال جرم حجمی، گردش ذرات،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
چکیده انگلیسی
In order to apply a spout-fluid bed reactor with a draft tube for the nitrification process of wastewater treatment, the influence of fluid-mechanical parameters on volumetric mass transfer coefficient was analyzed. Experiments were carried out in a 1000Â mm high 2D semi-column with a draft tube. The draft tube had a cross section of 50Ã50Â mm2 and the annular region of the reactor had a cross section of 50Ã140Â mm2. The work described in this paper reports the influence of several fluid-mechanical parameters including liquid and gas flow rates, particle diameters and particle circulation on volumetric mass transfer coefficient, kLa. The liquid flow ranged from 3.5-4.5Â m3/h and gas flow ranged from 300 to 800Â L/h. The particles used were glass spheres with diameters of 3, 4, 5 and 6Â mm. Tap water and air were used as the liquid and gas phase, respectively. The experimental results have shown that particle circulation through the draft tube contributes to kLa increase as well as the increase in the particle diameter, the gas and liquid flow rates.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering Science - Volume 134, 29 September 2015, Pages 129-137
Journal: Chemical Engineering Science - Volume 134, 29 September 2015, Pages 129-137
نویسندگان
Milena KneževiÄ, Dragan PovrenoviÄ,