کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6735279 1429053 2018 15 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of axial force-bending moment interaction on stochastic nonzero mean seismic response of reinforced concrete frames
ترجمه فارسی عنوان
اثر متقابل لحاظ نیروی خمشی محوری بر پاسخهای لرزه ای غیرمعمول استنباطی از قاب های بتنی تقویت شده
کلمات کلیدی
تعامل نیروی خمشی محوری، مدل بوو-ون، خطی سازی معادل تصادفی، قاب بتن مسلح، پاسخ غیرضروری، تقاضای انعطاف پذیر لرزه،
ترجمه چکیده
تجزیه و تحلیل لرزه نگاری ساختمان ها بایستی تعامل مقاومت نیروی محوری و لحظه خمشی در ستونها را در نظر بگیرد و اثرات نظم دوم از هم جدا شود. بسیاری از مدل های مبتنی بر فیبر در دسترس هستند، اما برای تجزیه و تحلیل تصادفی، به جز شبیه سازی مونت کارلو، مناسب نیستند. در مقابل، یک مدل قاب پلاستیکی توزیع شده بر اساس هیسترز بووک-ون، که به تازگی برای معرفی تعامل به شیوه ای ساده به کار گرفته شده است، آسان است برای پیاده سازی در خطی سازی معادل تصادفی. در اینجا اثر متقابل بر پاسخ متوسط ​​غیر صفر مورد بحث قرار می گیرد. پارامترهای مدل برای تجزیه و تحلیل ساختاری مهندسی هستند. نرم افزار به هشت قاب بتن مسلح تحت بار گرانشی و تحریک لرزه ای افقی است. به نظر می رسد رانش در میان دوجانبه تقریبا غیرمنتظره است. تقاضای چرخش و انعطاف پذیری انرژی ممکن است به طور قابل توجهی تغییر کند نه تنها در ستونها بلکه در پرتوها. در کل، افزایش در کاهش است؛ اثر متقابل منفی است. به عنوان مثال، درصد صد در صد تقاضای انعطاف پذیری چرخشی در حدود 10٪ یا در چند مورد 30٪ کاهش می یابد، در حالی که در بیشتر فریم ها و حتی دو و سه بار در دو فریم، افزایش تا 60٪ است. آمار لحظه خمشی نیز ممکن است تغییر کند. مقدار متوسط ​​بیش از واریانس تاثیر می گذارد. نتایج حاصل با نتایج ثابت شده در مورد لرزش تصادفی غیر عددی سازگار است. اثر متقابل بر روی اعضای بیرونی در داستان های پایین، فریم های بلند و زمین نرم مشخص شده است. مدل پلاستیکی توزیع شده به نظر می رسد برای تحلیل ساختاری عملی مناسب باشد.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Inelastic seismic analysis of buildings should consider the interaction of resisting axial force and bending moment in the columns, second order effects apart. Many fiber-based models are available but unsuitable for stochastic analysis, except Monte Carlo simulation. In contrast, a lumped plasticity frame model based on Bouc-Wen hysteresis, as recently extended to introduce interaction in a simple fashion, is straightforward to implement within stochastic equivalent linearization. Herein the interaction effect on the nonzero mean response is discussed. The model parameters are tuned for engineering structural analysis. Application is to eight reinforced concrete frames under gravity load and horizontal seismic excitation. The interstory drift appears to be almost insensitive to interaction. The rotation and energy ductility demands may change significantly, not only in the columns but also in the beams. All in all, increase prevails on decrease; the interaction effect is negative. For instance, decrease in the 95th percentile of rotation ductility demand is at most 10% or, in very few cases, 30%, whereas increase is up to 60% in most frames, and even two and three times in two frames. The bending moment statistics may change as well. Mean value is affected more than variance. Results are consistent with established outcome on nonzero mean random vibration. The interaction effect is marked on the outer members at bottom stories, tall frames, and soft ground. The lumped plasticity model seems to be suitable for practical structural analysis.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 174, 1 November 2018, Pages 139-153
نویسندگان
,