کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
676011 | 1459631 | 2006 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The heat capacity of polyethylene fibers measured by multi-frequency temperature-modulated calorimetry
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The apparent heat capacity of polyethylene fibers in the melting region was measured by quasi-isothermal, temperature-modulated differential scanning calorimetry (TMDSC) and compared with results from standard differential scanning calorimetry (DSC) and the solid and liquid thermodynamic heat capacity as references from the ATHAS Data Bank. Using a multi-frequency, complex sawtooth modulation in the quasi-isothermal mode disclosed for the first time that the uncorrected apparent heat capacity Cp=AΦ/(ATsÏ) of the liquid polyethylene fiber increases with increasing frequency (AΦ is the differential heat-flow rate and ATs is the sample temperature). The frequency-dependent heat capacity cannot be represented by the expression: Cp=AΦ/(ATsνÏ)[1+(ÏνÏ)2]0.5 because of a negative Ï2. The results were later confirmed by independent measurements on single sinusoidal quasi-isothermal TMDSC on the same material. The error is caused by shrinking of the fiber, which deforms the sample pan.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thermochimica Acta - Volume 442, Issues 1â2, 15 March 2006, Pages 35-41
Journal: Thermochimica Acta - Volume 442, Issues 1â2, 15 March 2006, Pages 35-41
نویسندگان
M. Pyda, E. Nowak-Pyda, B. Wunderlich,