Synthesis, characterization and properties of a castor oil modified biodegradable poly(ester amide) resin

A biodegradable poly(ester amide) resin was synthesized from N,N-bis(2-hydroxy ethyl) fatty amide of castor oil with maleic anhydride, phthalic anhydride and isophthalic acid (100:30:35:35 mole ratio) by the polycondensation process. The fatty amide of the oil was obtained for the first time with 95% yield. The chemical structure of the synthesized resin was characterized by spectroscopic techniques like FTIR, 1H NMR and 13C NMR. Various physical properties such as acid value, saponification value, iodine value, specific gravity and viscosity of the resin were also determined. Further the rheological behavior, studied in the steady shear mode showed shear thinning behavior of the resin. The epoxy cured poly(ester amide) thermoset using poly(amido amine) hardener exhibited better properties than with the cycloaliphatic amine hardener cured system. TGA studies also revealed higher thermal stability of the former system than the latter. In vitro-biodegradation study of the poly(ester amide) thermoset using Pseudomonas aeruginosa and Bacillus subtilus bacteria revealed superior biodegradability of the thermoset using the former bacterial strain. Excellent chemical resistance against various chemical media including alkali was observed for epoxy-poly(amido amine) cured poly(ester amide) resin over epoxy-cycloaliphatic amine one. The epoxy-poly(amido amine) cured poly(ester amide) thermoset thus has the potential to be used as surface coating material.

► A biodegradable poly(ester amide) resin was synthesized from castor oil.
► The fatty amide of the oil was obtained for the first time with quantitative yield.
► Epoxy-poly(amido amine) cured one showed better properties than cycloaliphatic amine.
► Superior biodegradability was found with P. aeruginosa than B. subtilus bacteria.
► The epoxy-poly(amido amine) cured system vouch its use as surface coating material.