Synthesis and characterization of silicone-modified vinyl acetate–acrylic emulsion copolymers

The triethoxyvinylsilane (TEVS) containing vinyl acetate (VAc)/2-ethylhexylacrylate (2-EHA) copolymers were prepared by emulsion copolymerization. The polymerization was performed with methacrylic acid (MAA) and auxiliary agents at 80 °C in the presence of ammonium peroxodisulfate (APS) as the initiator. Alkyl phenol ether sulfate and Arkupal N-300 were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of temperature, agitation speed, initiator and silicone concentrations on the properties of the silicone-modified VAc–acrylic emulsion copolymers were discussed. The obtained copolymers have high solid content (53%) and can be used in emulsion paints as a binder. The calculations of monomer conversion versus time histories and monomer conversion indicate that by increasing the TEVS concentration, the polymerization rate and the number of polymer particles decrease, respectively.