کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7004690 | 1454997 | 2013 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tribological behavior of components for radial piston hydraulic motors: Bench tests, failure analysis and laboratory dry sliding tests
ترجمه فارسی عنوان
رفتار تریبولوژیکی اجزاء برای موتورهای هیدرولیک پیستون شعاعی: تست های آزمایشگاهی، تجزیه و تحلیل شکست و آزمون آزمایش کششی خشک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سایش کشویی، سایش دو بدن، فولاد کربوریزه، پوشش های اسپری حرارتی، میکروسکوپ الکترونی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
چکیده انگلیسی
Bench tests and laboratory dry sliding tests were carried out on components for radial piston hydraulic motors involved in a boundary-lubricated sliding contact, with the aim of investigating the tribological behavior and improve their durability. Failure analysis of real components after bench tests (carried out on a rotating shaft, consisting of a quenched and tempered 36CrNiMo4 steel, coated by a Ni7Al layer deposited by Air Flame Spray, sliding against a carburized E470 steel contacting element) identified the main wear mechanism as two-body abrasion, due to hard particles detached from the AFS coating which induce severe plastic deformation on both the carburized steel contacting element and on the soft Ni-based matrix of the coating on the rotating shaft. The same wear mechanism was reproduced also in laboratory dry sliding tests, carried out on a block-on-ring tribometer under dry sliding conditions. Laboratory dry sliding tests allowed the investigation of the influence of normal load and sliding distance on friction and wear behavior of the tribological system under investigation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volume 305, Issues 1â2, 30 July 2013, Pages 238-247
Journal: Wear - Volume 305, Issues 1â2, 30 July 2013, Pages 238-247
نویسندگان
L. Ceschini, A. Marconi, C. Martini, A. Morri,