کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7004703 | 1454997 | 2013 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite
ترجمه فارسی عنوان
اثر بار اعمال شده بر رفتار خمشی کششی خشک و تغییر شکل زیر سطحی در کامپوزیت ماتریس فلز هیبریدی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سایش کشویی، فلزات غیر آهنی، کامپوزیت فلز ماتریکس، دیگر فرآیندهای مهندسی سطح، میکروسکوپ الکترونی، تست بپوشید
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
چکیده انگلیسی
In this study, a new processing technique, friction stir processing (FSP) was used to incorporate SiC and MoS2 particles into the matrix of an A356 Al alloy to form surface hybrid composite. The tool rotation rate was changed from 630 to 1600 rpm and a tool tilt angle of 3° was applied. Higher tool rotation rate was found to causes a more uniform dispersion of reinforcing particles and thus, decreases particles clustering. Dry sliding wear tests were conducted using a pin-on-disc machine. The subsurface deformation was assessed as a measure of variation in microhardness along the depth normal to the cross-section of the worn surface. It was found that the wear resistance of the processed samples improved significantly as compared to that of the as-cast alloy. Microstructural analysis showed that a MoS2 rich layer on the top of worn surface helped to decrease the plastic deformation in subsurface region and alleviate severe wear. The improvement in wear resistance of surface hybrid composite compared to that of the as-cast alloy was found to be more pronounced under higher applied loads.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volume 305, Issues 1â2, 30 July 2013, Pages 291-298
Journal: Wear - Volume 305, Issues 1â2, 30 July 2013, Pages 291-298
نویسندگان
S.A. Alidokht, A. Abdollah-zadeh, H. Assadi,