کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7104302 1460338 2018 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Finite dimensional models of the hydraulic hammer effect and solar tower control
ترجمه فارسی عنوان
مدل های محدود بعدی از اثر چکش هیدرولیک و کنترل برج خورشیدی
کلمات کلیدی
سیستم های خطی بعدی بی نهایت، چکش هیدرولیک، تقریب تابع انتقال، امواج شوک، کنترل برج خورشیدی،
ترجمه چکیده
وقوع امواج شوک حمل و نقل ناشی از باز شدن یا بسته شدن ناگهانی شیر، که به عنوان اثر چکش شناخته می شود، از منظر طراحی کنترل مهم است، زیرا محدودیت محدود بالایی را در حداکثر پهنای باند قابل دستیابی برای سیستم کنترل شده اعمال می کند. در این مقاله، مسئله مشخصه اثر هیدرولیک بر روی مایع حرارت در یک برج خورشیدی مورد بررسی قرار گرفته است. تابع انتقال که مربوط به افزایش فشار داخل لوله و سرعت سیال است، محاسبه می شود، همچنین قطب ها و صفرهای آن. به این ترتیب، برای این تابع انتقال با یک پیچیدگی پیشنهادی، می توان تقریبی خطی بعدی را بدست آورد. به عنوان یک برنامه، امواج در حال حرکت از فشار و سرعت سیال مورد استفاده برای کنترل دما در یک مدار معمولی برج خورشیدی شبیه سازی شده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی تکنولوژی و شیمی فرآیندی
چکیده انگلیسی
The occurrence of traveling shock waves associated to the sudden opening or closing of a valve, known as the hammer effect, is important from the perspective of control design because it imposes an upper bound constraint on the maximum bandwidth achievable for the controlled system. This article addresses the problem of characterizing hydraulic hammer effect of the heating fluid in a solar power tower. The transfer function that relates the increments of the pressure inside the pipe and the fluid velocity is computed, as well as its poles and zeros. In this way, it is possible to obtain finite dimensional linear approximations for this transfer function with a prescribed complexity. As an application, the traveling waves of pressure and velocity of a fluid used for temperature control in a typical solar tower circuit are simulated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Process Control - Volume 65, May 2018, Pages 78-83
نویسندگان
, , ,