کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7127722 1461590 2019 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Detecting beam offsets in laser welding of closed-square-butt joints by wavelet analysis of an optical process signal
ترجمه فارسی عنوان
تشخیص جابجایی پرتوهای در جوشکاری لیزر اتصالات بسته با مربع با تحلیل موجک یک سیگنال فرایند نوری
ترجمه چکیده
جوش لیزر پرتاب شده از اتصالات بسته با مربع با توجه به موقعیت پرتو لیزر نسبت به مفصل حساس است، زیرا حتی یک افست کوچک ممکن است منجر به کمبود مخرب فیبر نوری شود. ارزیابی یک سیستم با استفاده از یک فوتودیود هماهنگ با پرتو لیزر پردازش، توانایی تشخیص تغییرات شرایط فرآیند را نشان می دهد، مثلا وقتی که تکامل یک فاصله بین پرتو لیزر و مفصل باشد. جوش با مسیرهای ربات های مختلف و با لیزر پردازش که در حالت مداوم و پالس عمل می کند، داده ها را برای این ارزیابی فراهم می کند. روش تشخیصی از تحلیل موجک سیگنال عکاسی عکس استفاده می کند که اطلاعات مربوط به شرایط فرآیند را نشان می دهد که توسط انتشار نوری نوری پلاسما در طول جوشکاری نشان داده می شود. این اطلاعات آزمایشی آفلاین را ارزیابی کرده اند. نتایج نشان می دهد پتانسیل این روش تشخیص است که به طور واضح برای توسعه یک سیستم برای ردیابی مشترک جوش مفید است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی برق و الکترونیک
چکیده انگلیسی
Robotized laser beam welding of closed-square-butt joints is sensitive to the positioning of the laser beam with respect to the joint since even a small offset may result in a detrimental lack of sidewall fusion. An evaluation of a system using a photodiode aligned coaxial to the processing laser beam confirms the ability to detect variations of the process conditions, such as when there is an evolution of an offset between the laser beam and the joint. Welding with different robot trajectories and with the processing laser operating in both continuous and pulsed mode provided data for this evaluation. The detection method uses wavelet analysis of the photodetector signal that carries information of the process condition revealed by the plasma plume optical emissions during welding. This experimental data have been evaluated offline. The results show the potential of this detection method that is clearly beneficial for the development of a system for welding joint tracking.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optics & Laser Technology - Volume 109, January 2019, Pages 178-185
نویسندگان
, , , , , ,