کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7178698 1467470 2014 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
An experimental study on the mechanical behaviour of two polyurethane resins used for geotechnical applications
ترجمه فارسی عنوان
یک مطالعه تجربی در مورد رفتار مکانیکی دو رزین پلی اورتان مورد استفاده برای کاربردهای ژئوتکنیکی
کلمات کلیدی
رزین های پلی اورتان، آثار ژئوتکنیک، تقویت بنیاد، رفتار مکانیکی،
ترجمه چکیده
هدف از این مقاله آزمایش تجربی رفتار مکانیکی رزین های مختلف پلی یورتان گسترش یافته است که به طور گسترده ای برای بهبود زمین و بازسازی پایه استفاده می شود. این مطالعه اولین قدم به سوی هدف اصلی است که تعریف یک روش طراحی برای این نوع مداخله است. این مطالعه شامل دو هدف است: (1) ایجاد رابطه بین چگالی رزین و فشار محرمانه در شرایط گسترش، و (2) اندازه گیری پارامترهای مکانیکی از آزمون های فشرده سازی ساده روی نمونه های رزین. آزمایش های تجربی بر روی دو نوع مختلف رزین انجام شد و نتایج نشان می دهد که استحکام محرک در فاز انبساط بیشتر است، بیشتر تراکم رزین سخت شده است. علاوه بر این، تراکم رزین و تنش محرمانه با یک قانون دقیق تعریف شده است. آزمایشات آزمایشگاهی نشان می دهد که چگونه رفتار تنش و کرنش به شدت غیر خطی است و هر دو پارامترهای کششی و مقاومت به طور فزاینده در شرایط مرزی طی فاز انبساط بستگی دارند.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
The objective of this paper is to experimentally investigate the mechanical behaviour of different polyurethane expanding resins, which are widely used for ground improvement and foundation remediation. This study is the first step towards the primary objective, which is to define a design procedure for this type of intervention. This study encompasses two goals: (1) develop a relationship between the density of the resin and the confinement pressure in expansion conditions, and (2) measure the mechanical parameters from simple compression tests on resin specimens. Experimental tests were performed on two different types of resin, and the results reveal that the higher the confinement stress is during the expansion phase, the greater the hardened resin density. Moreover, the resin density and confinement stress are linked by a well-defined law. The laboratory tests show how the stress-strain behaviour is strongly non-linear and that both the elastic and strength parameters greatly depend on the boundary conditions during the expansion phase.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanics of Materials - Volume 71, April 2014, Pages 101-113
نویسندگان
, , ,