کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7178806 1467659 2016 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A dynamic damage constitutive model for a rock mass with non-persistent joints under uniaxial compression
ترجمه فارسی عنوان
یک مدل سازنده آسیب پویا برای توده سنگی با مفاصل غیر ماندگار تحت فشرده سازی یکپارچه
کلمات کلیدی
جرم سنگ با مفاصل غیر ماندگار. مدل سازنده آسیب پویا، نقص های مکرر و مزوسکوپی، جبران خسارت، ماتریس الاستیک معادل،
ترجمه چکیده
بیشتر مشکالت مربوط به مهندسی توده سنگی شامل ارزیابی قدرت دینامیکی توده سنگ و تغییر شکل پذیری است. به عنوان بخشی از توده سنگ، ضعف های مزوسکوپی مانند میکروکراک و آنهایی که از قبیل مفاصل مانند مفاصل، ذاتا قدرت نفوذ پویا و رفتار تغییر شکل را تحت تاثیر قرار می دهند. تقریبا هیچ یک از مدل های موجود نمی توانند اثر مشترک این دو نوع معایب را در رفتار مکانیکی پویای توده سنگ بررسی کنند. این تحقیق بر توده سنگ با چند مجموعه از مفاصل غیر ماندگار تمرکز می کند و یک مدل ریاضی را برای انحصاری بودن در قدرت دینامیکی و تغییر شکل پذیری ناشی از مفاصل ایجاد می کند. بر این اساس، یک رویکرد شامل مدل های موجود یا روش های موجود برای ایجاد شبیه سازی کامل نسبت تنش-تنش پویا توده سنگی است که در آن پارامترهای هندسی مشترک مانند طول مفصل و زاویه خمشی، اجزای قدرت مانند مفصل اصطکاک داخلی و اعمال تغییر شکل مانند سفتی عادی و برشی می تواند مورد توجه قرار گیرد. به منظور بررسی اعتبار مدل پیشنهادی، مجموعه ای از نمونه های محاسباتی ساخته شده است و نتایج به خوبی با مفاهیم نظری مطابقت دارد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
Most problems faced by the practicing rock mass engineering involve the evaluation of rock mass dynamic strength and deformability. As part of a rock mass, the mesoscopic flaws such as the microcracks and the macroscopic ones such as the joints both inherently affect the rock mass dynamic strength and deformational behavior. Nearly none of the existing models can handle the co-effect of these two kinds of flaws on the rock mass dynamic mechanical behavior. This study focusses on the rock mass with multi-sets of non-persistent joints and establishes a mathematical model accounting for the anisotropy in dynamic strength and deformability induced by the joints. Accordingly, an approach incorporating the existing models or methods to enable perfect simulation of the dynamic stress-strain relationship of a rock mass is proposed, in which the joint geometrical parameters such as the joint length and dip angle, the strength ones such as the joint internal friction and the deformational ones such as the joint normal and shear stiffness can all be taken into account. In order to investigate the validity of the proposed model, a series of calculation examples have been made and the results fits very well with the theoretical ones.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanics Research Communications - Volume 77, October 2016, Pages 12-20
نویسندگان
, ,