کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
737623 | 1461912 | 2012 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A 3-axis accelerometer and strain sensor system for building integrity monitoring
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
An Ultra-Low-Power readout architecture for capacitive MEMS-based accelerometers and strain sensors is presented. The system can read both accelerometers and strain sensors in a half-bridge configuration. An accurate VerilogA model of the sensor was made to improve simulations. The gain of the system is controlled by integrating pulses from the excitation circuit allowing accurate control of the Signal-to-Noise ratio. A Figure-of-Merit of 4.41 × 10−20 F√(W/Hz) was achieved for a sensor range of ±2.0 g and ±20,000 μɛ over a 100 Hz bandwidth. A minimum of 440 nW power consumption was recorded. Residual motion artifacts are also cancelled by the system.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 188, December 2012, Pages 141–147
Journal: Sensors and Actuators A: Physical - Volume 188, December 2012, Pages 141–147
نویسندگان
J. Santana, R. van den Hoven, C. van Liempd, M. Colin, N. Saillen, D. Zonta, D. Trapani, T. Torfs, C. Van Hoof,