Closed-form solutions for elastic stress–strain analysis in unbalanced adhesive single-lap joints considering adherend deformations and bond thickness

A theoretical model is developed for the stress analysis in adhesive-bonded single-lap joints under tension, for which the two adherends could have different thicknesses and consist of different materials. A two-dimensional (2D) elasticity theory is adopted in the analysis, which simultaneously incorporates the complete strain–displacement and the complete stress–strain relationships for the adherends and adhesive. The approach provides a unified treatment for any possible adhesive layer flexibility and capable of satisfying the stress-free condition at the ends of the bondline. An explicit closed-form analytical solution is formulated for upper and lower adherends/adhesive stresses (strains) and tensile, shear and bending loads acting on the adherends along the overlap and then simplified for practical applications, and simple design formulae for adhesive stresses are produced. The results predicted by the present full and simplified solutions were compared with the previously theoretical solution by Bigwood and Crocombe (1989) [35], and the 2D geometrically nonlinear finite element model using MSC/NASTRAN. The agreement validates the present formulation and solutions for unbalanced bonded joints. The effects of the stiffness unbalanced parameters on the adhesive stress distributions were also discussed.