کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
779890 | 1463478 | 2015 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Debonding on command of adhesive joints for the automotive industry
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this study a methodology to assure easy debonding of adhesive joints by combining the inductive heating method and the use of thermally expandable particles (TEPs) was developed. Two commercially structural adhesive systems used in the automotive industry (one polyurethane and one epoxy) were tested. First, the influence of TEPs content on the lap-shear strength of the TEPs-modified single lap joints was investigated. Further, the ability of the TEPs-modified joints to support temperature controlled debonding was evaluated. It was showed that the control of the debonding process by temperature is possible. The temperature needed for debonding is a function of TEPs content and can be lowered by increasing the TEPs content.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 59, June 2015, Pages 14–20
Journal: International Journal of Adhesion and Adhesives - Volume 59, June 2015, Pages 14–20
نویسندگان
M.D. Banea, L.F.M. da Silva, R.J.C. Carbas,