کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7935920 1513059 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Environmental and nanomechanical testing of an alternative polymer nanocomposite greenhouse covering material
ترجمه فارسی عنوان
تست زیست محیطی و نانوموکانیک مواد پوشش دهنده گلخانه ای نانوکامپوزیتی جایگزین
کلمات کلیدی
گلخانه مواد پوشش پاسخ نانو مکانیکی، میکروسکوپ پروب اسکن فیلم نانو کامپوزیت پلیمر، محیط حرارتی داخل ساختمان،
ترجمه چکیده
مواد پوشش دهنده گلخانه تاثیر قابل توجهی در شرایط حرارتی داخلی دارند. توسعه مواد جایگزین که می تواند نفوذ تابش و گرما در گلخانه را تنظیم کند، می تواند شرایط کشت و همچنین نیازهای انرژی برای گرمایش، خنک کننده و تهویه را به حداقل برساند. در این مطالعه، نانوکامپوزیتهای نمونه اولیه پلیمری از طریق استفاده از پراکندگیهای یکنواخت گرانول بسیار متخلخل ایجاد شد که قادر به تنظیم تابش فعال فتوسنتز بودند. مواد مورد بررسی بر روی عملکرد محیطی و همچنین رفتار نانومکانیکیشان آزمایش شده است. برای این منظور، دو گلدان تجربی کوچک در اندازه ی یکسان استفاده شد که در آن درجه حرارت، رطوبت نسبی و تراکم انرژی خورشیدی (نفوذ و تابش فعال فتوسنتزی) اندازه گیری شد. خواص مکانیکی، یعنی مدول یانگ و سختی مواد آزمایش شده، با تجزیه و تحلیل منحنی های بار جابجایی اندازه گیری شده توسط آزمون نانو انداختن برآورد شد. یافته های این مطالعه نشان می دهد که ماده پیشنهاد شده دارای چنین عملکردی در تابش است که اجازه می دهد تا آن را برای محصولات مقاوم در برابر درجه حرارت و رشد سرد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
Greenhouse covering materials have a substantial impact on the in-house thermal conditions. The development of alternative materials which can regulate the radiation and heat penetration in the greenhouse can significantly improve the cultivation conditions as well as minimize the energy requirements for heating, cooling and ventilation. In this study polymer prototype nanocomposites were developed through the use of uniform dispersions of highly porous granules, capable of regulating the Photosynthetically Active Radiation. The investigated material was tested against its environmental performance as well as for its nanomechanical behaviour. For this purpose, two identical small-scale experimental greenhouses were employed, in which the temperature, the relative humidity and the density of solar energy (penetrating and Photosynthetically Active Radiation) were measured. The mechanical properties, namely Young's modulus and hardness of the tested material, were estimated by analysing the measured load-displacement curves delivered by nanoindentation testing. The findings of this study revealed that the proposed material has such a performance in radiation which allows its employment for temperature tolerant crops and cool growing.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Solar Energy - Volume 159, 1 January 2018, Pages 1-9
نویسندگان
, , , , ,