کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
794393 | 1466786 | 2006 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill: Part-II. Microstructure evolution
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper deals with the evolution of microstructure through the thickness of the strip in the hot strip mill. DEFORM-HT, an add-on heat treatment module with the commercial finite element software, DEFORM was used towards this end. Microstructure evolution equations available in literature were incorporated in the HT module. The type and extent of recrystallisation and austenite grain size were obtained for plain carbon steel strips of final thickness 2.0, 3.5 and 4.0 mm. The microstructure is validated against experimental data for ferrite microstructure and mechanical properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 178, Issues 1–3, 14 September 2006, Pages 388–394
Journal: Journal of Materials Processing Technology - Volume 178, Issues 1–3, 14 September 2006, Pages 388–394
نویسندگان
Madakasira Prabhakar Phaniraj, Binod Bihari Behera, Ashok Kumar Lahiri,