کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7995142 | 1516162 | 2018 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Development of Cu-matrix, Al/Mn-reinforced, multilayered composites by accumulative roll bonding (ARB)
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this work, nanostructured Cu/Al/Mn multilayered composites were successfully fabricated by the accumulative roll bonding (ARB) method. The microstructure of the produced composites was studied by X-ray diffraction and scanning electron microscopy. Also, the hardness, tensile and corrosion behaviors of the composites were studied as a function of ARB cycles. It was observed that by increasing the number of ARB cycles, the thickness of the Al layers is decreased from 0.3 mm to 0.25 μm, where a Cu-matrix, Al/Mn-reinforced, multilayered composite with homogeneously distributed Al layers and Mn particles was achieved after nine ARB cycles. Also, the results revealed the development of nanostructures with the mean crystallite size of about 50 nm in the produced composites. According to the tensile experiments, by increasing ARB cycles, the strength of the composites was increased and reached 420.8 MPa. The electrochemical corrosion behavior of the produced composites was also investigated in a 3.5 wt % NaCl solution by a potentiostat-galvanostat device. It was found that the corrosion rate of the composite is increased by increasing ARB cycles from 5 μA/cm2 to 12.2 μA/cm2 and then decreased to 9.5 μA/cm2.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 732, 25 January 2018, Pages 674-682
Journal: Journal of Alloys and Compounds - Volume 732, 25 January 2018, Pages 674-682
نویسندگان
Morteza Alizadeh, Mehrangiz K. Dashtestaninejad,