Effect of optimum compaction moisture content formulations on the strength and durability of sustainable stabilised materials

The achievement of Optimum Compaction Moisture Content (OCMC) of clay soil plays an important role in compaction as well as the durability and strength of compacted soil. This is due to its effect on the structure and orientation of the clay soil particles. Most researchers on stabilised systems involving soils and/or industrial waste by-product additives for applications in roads and buildings are faced with the problem of how to approach the establishment of OCMC, when the complex mixtures involved. This paper reports on the laboratory investigation of theoretical methods of two different approaches to establish the OCMC in the stabilisation of clay soil involving multi-binary binder in cementitious binder system. Furthermore, this research also explores the use of an industrial by-product, Pulverized Fuel Ash (PFA) as partial target material and ground granulated blastfurnace slag (GGBS), with a view to reducing the reliance on the traditional cementitious binders, such as lime and/or Portland Cement (PC), in stabilising Lower Oxford Clay (LOC) soil combining with PFA at 50:50 ratio. LOC + PFA was stabilised both in conventional manner using Lime and PC as control and using sustainable binders incorporating GGBS. The results show that there was no one particular approach to the establishment of the optimal compaction moisture content for best strength development and durability. The best approach being dependent on the period of curing, stabiliser content and whether GGBS was blended with Lime or with PC. Of the various stabilisers studied, the highest strength magnitudes were however recorded with LOC-PFA stabilised using the blended binders incorporating GGBS. For all 7, 28 and 56 days of curing periods, the PC-based stabilisers were observed to be less sensitive to the different approaches to compaction moisture content, relative to the lime-based systems.