کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8869372 | 1622608 | 2018 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Copper leaching from waste printed circuit boards using typical acidic ionic liquids recovery of e-wastes' surplus value
ترجمه فارسی عنوان
شستشوی مس از صفحات چاپی ضایعات با استفاده از مایعات یونی اسیدی، بهبود ارزش اضافی مواد زائد الکترونیکی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
In this study, using several types of acidic ionic liquids as the leaching reagents, the leaching behaviors of the copper present in waste printed circuit boards (WPCBs) were investigated. The effects of various parameters on the copper leaching rate were studied, such as the particle size of the shredded WPCB, type of ionic liquid used, hydrogen peroxide dosage, solid-to-liquid ratio, leaching temperature, and leaching time. The experimental results showed that the copper leaching rate increases continuously when the powder particle size is increased from 0.071 to 0.500â¯mm. Moreover, the copper leaching rate also increases with an increase in the leaching temperature. In contrast, the leaching rate first increases and then decreases with increases in the leaching time, hydrogen peroxide dosage, and solid-to-liquid ratio. The optimal conditions that provided a 98.31% copper leaching rate were: particle size >0.500â¯mm, 8.5â¯mL 90% (v/v) ionic liquid, 1.5â¯mL 30% hydrogen peroxide, solid-to-liquid ratio of 1/20, leaching temperature of 80â¯Â°C, and leaching time of 2â¯h.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Waste Management - Volume 78, August 2018, Pages 191-197
Journal: Waste Management - Volume 78, August 2018, Pages 191-197
نویسندگان
Ding-jun Zhang, Li Dong, Yong-tong Li, Yanfei Wu, Ying-xia Ma, Bin Yang,