کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9952390 | 1450513 | 2018 | 19 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Validation of different SAC305 material models calibrated on isothermal tests using in-situ TMF measurement of thermally induced shear load
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی کامپیوتر
سخت افزارها و معماری
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Finally, for Sn96.5Ag3.0Cu0.5 solder alloy the ability of the different material formulations to reproduce trends of measured force-displacement hysteresis was analyzed: for double power-law creep model (DPL), unified inelastic strain formulation by Anand, and unified visco-plastic model proposed by Chaboche. Their accuracies in predicting of the acceleration factor between the different temperature profiles are summarized and discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Microelectronics Reliability - Volume 91, Part 1, December 2018, Pages 67-85
Journal: Microelectronics Reliability - Volume 91, Part 1, December 2018, Pages 67-85
نویسندگان
M. Kuczynska, N. Schafet, U. Becker, R. Metasch, M. Roellig, A. Kabakchiev, S. Weihe,