Enhancement of the adhesive joint strength of the epoxy–amine system via the addition of a resole-type phenolic resin Fulltext Access 9 Pages 2007
A scanning force microscopy study of grain boundary energy in copper subjected to equal channel angular pressing Fulltext Access 9 Pages 2007
Fatigue analysis of concrete bridge deck slabs reinforced with E-glass/vinyl ester FRP reinforcing bars Fulltext Access 9 Pages 2007
Analysis and design of FRP composites for seismic retrofit of infill walls in reinforced concrete frames Fulltext Access 9 Pages 2007
Techniques to reduce the peel stresses in adhesive joints with composites Fulltext Access 9 Pages 2007
Stress analysis of bonded lap joints using fracture mechanics and energy balance Fulltext Access 9 Pages 2007
Influence of the soft segment length and content on the synthesis and properties of isocyanate-terminated urethane prepolymers Fulltext Access 9 Pages 2007
A new evaluation procedure for the butt-joint test of adhesive technology: Determination of the complete set of linear elastic constants Fulltext Access 9 Pages 2007
A numerical study of parallel slot in adherend on the stress distribution in adhesively bonded aluminum single lap joint Fulltext Access 9 Pages 2007
Development and characterization of adhesives from soy protein for bonding wood Fulltext Access 9 Pages 2007
Effect of DC electric field on the tensile deformation of ultrafine-grained 3Y-TZP at 1450–1600 °C Fulltext Access 9 Pages 2007
Experimental behaviour of threaded steel rods glued into high-density hardwood Fulltext Access 9 Pages 2007
The tribological behavior of polymer coated carbon composites under dry and water lubricating conditions Fulltext Access 9 Pages 2007
Analytical determination of the modes I, II and III energy release rates in a delaminated laminate and validation of a delamination criterion Fulltext Access 9 Pages 2007
Finite element dynamic analysis of orthotropic sandwich plates with an electrorheological fluid core layer Fulltext Access 9 Pages 2007
Fast characterization of carbon/epoxy rings for use in the ball-joints of the Maeslant storm surge barrier Fulltext Access 9 Pages 2007
Buckling and debond growth of partial debonds in adhesively bonded composite splice joints Fulltext Access 9 Pages 2007
The effect of Stone–Wales defect on the tensile behavior and fracture of single-walled carbon nanotubes Fulltext Access 9 Pages 2007
Analysis of bolted joints in composite laminates: Strains and bearing stiffness predictions Fulltext Access 9 Pages 2007
Microstructural investigation of the volume beneath nanoindentations in copper Fulltext Access 9 Pages 2007
Theoretical elastic stiffness, structure stability and thermal conductivity of La2Zr2O7 pyrochlore Fulltext Access 9 Pages 2007
An electron microscopic study of spheroidal graphite nodules formed in a medium-carbon steel by annealing Fulltext Access 9 Pages 2007
Effect of the ordering process on pseudoelasticity in Fe3Ga single crystals Fulltext Access 9 Pages 2007
Thermomechanical instability analysis of inhomogeneous deformation in amorphous alloys Fulltext Access 9 Pages 2007
Density dependence of the compressive properties of porous copper over a wide density range Fulltext Access 9 Pages 2007
Principle and realization of improving shape memory effect in Fe–Mn–Si–Cr–Ni alloy through aligned precipitations of second-phase particles Fulltext Access 9 Pages 2007
A constrained domain-switching model for polycrystalline ferroelectric ceramics. Part I: Model formulation and application to tetragonal materials Fulltext Access 9 Pages 2007
Geometric simulation and surface statistics of coarsening faceted surfaces Fulltext Access 9 Pages 2007
Determination of the critical crack length of notched weft-knitted glass fiber variable width composite plates Fulltext Access 9 Pages 2007
Detection and study of photo-generated spin currents in nonmagnetic semiconductor materials Fulltext Access 9 Pages 2007
Simulations of boundary migration during recrystallization using molecular dynamics Fulltext Access 9 Pages 2007
The impact of peak shock stress on the microstructure and shear behavior of 1018 steel Fulltext Access 9 Pages 2007
An experimental investigation of crack initiation in thin sheets of nitinol Fulltext Access 9 Pages 2007
A numerical procedure for retrieving material creep properties from bending creep tests Fulltext Access 9 Pages 2007
Nanostructural evolution in surveillance test specimens of a commercial nuclear reactor pressure vessel studied by three-dimensional atom probe and positron annihilation Fulltext Access 9 Pages 2007
Predicting twinning stress in fcc metals: Linking twin-energy pathways to twin nucleation Fulltext Access 9 Pages 2007
Effect of laser field and thermal stress on diffusion in laser doping of SiC Fulltext Access 9 Pages 2007
Ballistic limit prediction using a numerical model with progressive damage capability Fulltext Access 9 Pages 2007
Development of the composite RAS (radar absorbing structure) for the X-band frequency range Fulltext Access 9 Pages 2007
Elasticity solution for the free vibration analysis of laminated cylindrical panels using the differential quadrature method Fulltext Access 9 Pages 2007
Free vibration of laminated composite conical shells with random material properties Fulltext Access 9 Pages 2007
Effect of double constraints on the optimization of two-component armor systems Fulltext Access 9 Pages 2007
An energy-based fatigue damage parameter for off-axis unidirectional FRP composites Fulltext Access 9 Pages 2007
The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites Fulltext Access 9 Pages 2007
Closed-form analysis of the buckling loads of symmetrically laminated orthotropic plates considering elastic edge restraints Fulltext Access 9 Pages 2007
Strength design of composite beam using gradient and particle swarm optimization Fulltext Access 9 Pages 2007
Nonlinear free vibration analysis of laminated composite shells in hygrothermal environments Fulltext Access 9 Pages 2007
Comparison of the effectiveness of boron/epoxy and graphite/epoxy patches for repaired cracks emanating from a semicircular notch edge Fulltext Access 9 Pages 2007
Initiation and progression of composite patch debonding in adhesively repaired cracked metallic sheets Fulltext Access 9 Pages 2007
Design of variable stiffness composite panels for maximum fundamental frequency using lamination parameters Fulltext Access 9 Pages 2007
Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beams Fulltext Access 9 Pages 2007
Shape memory effect and mechanical properties of carbon nanotube/shape memory polymer nanocomposites Fulltext Access 9 Pages 2007
Nonlinear dynamic response of piezoelastic laminated plates considering damage effects Fulltext Access 9 Pages 2007
Optimum assembly automation level selection module as the component of advisory system Fulltext Access 9 Pages 2007
Investigation of anti-plane shear behavior of a Griffith permeable crack in functionally graded piezoelectric materials by use of the non-local theory Fulltext Access 9 Pages 2007
Longitudinal strength analysis of ship hulls of composite materials under sagging moments Fulltext Access 9 Pages 2007
Stress concentration and buckling behaviour of shear loaded composite panels with reinforced cutouts Fulltext Access 9 Pages 2007
Local buckling for triangular and lemniscate delaminations near the surface of laminated cylindrical shells under hygrothermal effects Fulltext Access 9 Pages 2007
Field testing and capacity-ratings of advanced composite materials short-span bridge superstructures Fulltext Access 9 Pages 2007
The response of natural fibre composites to ballistic impact by fragment simulating projectiles Fulltext Access 9 Pages 2007
Computational evaluation of effective material properties of composites reinforced by randomly distributed spherical particles Fulltext Access 9 Pages 2007
Interfacial stresses of FRP strengthened concrete beams: Effect of shear deformation Fulltext Access 9 Pages 2007
Online damage detection for laminated composite shells partially filled with fluid Fulltext Access 9 Pages 2007
The behavior of angle-ply laminated cylindrical shells with viscoelastic interfaces in cylindrical bending Fulltext Access 9 Pages 2007
3-D modelling of cyclically loaded composite patch repair of a cracked plate Fulltext Access 9 Pages 2007
Mechanical property degradation of a Nicalon fiber reinforced SiNC ceramic matrix composite under thermal shock loading Fulltext Access 9 Pages 2007
Manufacturing and structural safety evaluation of a composite train carbody Fulltext Access 9 Pages 2007
Vibration suppression of laminated plates with 1–3 piezoelectric fiber-reinforced composite layers equipped with interdigitated electrodes Fulltext Access 9 Pages 2007
Dynamic analysis of a crack in a functionally graded material sandwiched between two elastic layers under anti-plane loading Fulltext Access 9 Pages 2007
Analysis of natural frequencies of composite plates by an RBF-pseudospectral method Fulltext Access 9 Pages 2007
Fatigue life prediction of composite materials using polynomial classifiers and recurrent neural networks Fulltext Access 9 Pages 2007
A study on the low-velocity impact response of laminates for composite railway bodyshells Fulltext Access 9 Pages 2007